Home / best dating2016 ru / Updating a ceiling fan

Updating a ceiling fan dating subreddit

(I’m 5’9”, hubby is 5’11”.) Something else to consider is your lamp shade.

My shade was the type that fits on the lamp with a harp – it’s called a spider fitting: If you have an uno style shade, or the type that fits right over the lamp socket, you’ll have to use a different method: I’m sure there’s a way to wire that type of shade up there.

That doesn’t bug me one bit, since you only see the light bulbs if you’re right under it: Honestly, you see less of the bulbs this way than with the original glass shades.

One more thing to consider is the size of your shade.

I noticed there was a little jobby on the bottom where the pull chain came out.:) I looked around for awhile, but couldn’t find the exact piece I needed. There I found exactly what I was looking for: Two of these little connectors came in a package for about

I noticed there was a little jobby on the bottom where the pull chain came out.

:) I looked around for awhile, but couldn’t find the exact piece I needed. There I found exactly what I was looking for: Two of these little connectors came in a package for about $1.50. I threaded the connector to the fan, put the longer connector into that one, and then put the hole of the lamp shade over the long piece: I secured the shade up there with a small nut (picture on the right). The original lamp shade I tried was way too big though, so I took another off a lamp and used that instead (a lovely from Pottery Barn I got with a gift card last year): Love, love, LOVE.

Lowe’s Guy and I both spent a good ten minutes looking through the drawers of nuts and connectors, and still couldn’t find anything that worked. 2 came up to help and suggested I look in…wait for it…the . There’s a few things to consider if you want to try this out – first of which is your ceiling height.

Since I will be up there I am want to also run a new electrical line and replace the single wall switch making use of the multi switch / light fan.

What type of wire should I run from the wall switch to the celling box to support the new fan's blue wire?

||

I noticed there was a little jobby on the bottom where the pull chain came out.:) I looked around for awhile, but couldn’t find the exact piece I needed. There I found exactly what I was looking for: Two of these little connectors came in a package for about $1.50. I threaded the connector to the fan, put the longer connector into that one, and then put the hole of the lamp shade over the long piece: I secured the shade up there with a small nut (picture on the right). The original lamp shade I tried was way too big though, so I took another off a lamp and used that instead (a lovely from Pottery Barn I got with a gift card last year): Love, love, LOVE.Lowe’s Guy and I both spent a good ten minutes looking through the drawers of nuts and connectors, and still couldn’t find anything that worked. 2 came up to help and suggested I look in…wait for it…the . There’s a few things to consider if you want to try this out – first of which is your ceiling height.Since I will be up there I am want to also run a new electrical line and replace the single wall switch making use of the multi switch / light fan.What type of wire should I run from the wall switch to the celling box to support the new fan's blue wire?I don’t know what it is, but I love how it turned out. Especially because it only cost $1.50: If you don’t have a drum shade, check out Lowe’s! I always find great options at Home Goods too, usually for less than $15. The wiring coming out of the ceiling is also really too short to connect to the new fan easily.I understand I need to get in the attic (lucky the support brace is in the attic) and fix that box properly so no weight is on the drywall.What type of wall switch should I install to control the fan and light independently?The type of wire you use depends on what kind of circuit you are attaching to. The "3" will give you an extra red wire and that will be used to separate your fan and light controls.

.50. I threaded the connector to the fan, put the longer connector into that one, and then put the hole of the lamp shade over the long piece: I secured the shade up there with a small nut (picture on the right). The original lamp shade I tried was way too big though, so I took another off a lamp and used that instead (a lovely from Pottery Barn I got with a gift card last year): Love, love, LOVE.Lowe’s Guy and I both spent a good ten minutes looking through the drawers of nuts and connectors, and still couldn’t find anything that worked. 2 came up to help and suggested I look in…wait for it…the . There’s a few things to consider if you want to try this out – first of which is your ceiling height.Since I will be up there I am want to also run a new electrical line and replace the single wall switch making use of the multi switch / light fan.What type of wire should I run from the wall switch to the celling box to support the new fan's blue wire?I don’t know what it is, but I love how it turned out. Especially because it only cost

I noticed there was a little jobby on the bottom where the pull chain came out.

:) I looked around for awhile, but couldn’t find the exact piece I needed. There I found exactly what I was looking for: Two of these little connectors came in a package for about $1.50. I threaded the connector to the fan, put the longer connector into that one, and then put the hole of the lamp shade over the long piece: I secured the shade up there with a small nut (picture on the right). The original lamp shade I tried was way too big though, so I took another off a lamp and used that instead (a lovely from Pottery Barn I got with a gift card last year): Love, love, LOVE.

Lowe’s Guy and I both spent a good ten minutes looking through the drawers of nuts and connectors, and still couldn’t find anything that worked. 2 came up to help and suggested I look in…wait for it…the . There’s a few things to consider if you want to try this out – first of which is your ceiling height.

Since I will be up there I am want to also run a new electrical line and replace the single wall switch making use of the multi switch / light fan.

What type of wire should I run from the wall switch to the celling box to support the new fan's blue wire?

||

I noticed there was a little jobby on the bottom where the pull chain came out.:) I looked around for awhile, but couldn’t find the exact piece I needed. There I found exactly what I was looking for: Two of these little connectors came in a package for about $1.50. I threaded the connector to the fan, put the longer connector into that one, and then put the hole of the lamp shade over the long piece: I secured the shade up there with a small nut (picture on the right). The original lamp shade I tried was way too big though, so I took another off a lamp and used that instead (a lovely from Pottery Barn I got with a gift card last year): Love, love, LOVE.Lowe’s Guy and I both spent a good ten minutes looking through the drawers of nuts and connectors, and still couldn’t find anything that worked. 2 came up to help and suggested I look in…wait for it…the . There’s a few things to consider if you want to try this out – first of which is your ceiling height.Since I will be up there I am want to also run a new electrical line and replace the single wall switch making use of the multi switch / light fan.What type of wire should I run from the wall switch to the celling box to support the new fan's blue wire?I don’t know what it is, but I love how it turned out. Especially because it only cost $1.50: If you don’t have a drum shade, check out Lowe’s! I always find great options at Home Goods too, usually for less than $15. The wiring coming out of the ceiling is also really too short to connect to the new fan easily.I understand I need to get in the attic (lucky the support brace is in the attic) and fix that box properly so no weight is on the drywall.What type of wall switch should I install to control the fan and light independently?The type of wire you use depends on what kind of circuit you are attaching to. The "3" will give you an extra red wire and that will be used to separate your fan and light controls.

.50: If you don’t have a drum shade, check out Lowe’s! I always find great options at Home Goods too, usually for less than . The wiring coming out of the ceiling is also really too short to connect to the new fan easily.I understand I need to get in the attic (lucky the support brace is in the attic) and fix that box properly so no weight is on the drywall.What type of wall switch should I install to control the fan and light independently?The type of wire you use depends on what kind of circuit you are attaching to. The "3" will give you an extra red wire and that will be used to separate your fan and light controls.

579 comments

  1. How to remove glass and add a shade to a ceiling fan.

  2. Over the course of those years the fan blades had been cleaned a few times, but not the top of the brass part. If I live here for another 20 years I'm.

  3. Painting a Ceiling Fan. Tweet. Share. Pin +1. I love your blogs especially the ceiling fan idea. I have several that need updating but they have three.

  4. Is a dated old ceiling fan bringing down your room's look. If you’re not in love with the look of your ceiling fan, try updating to a more modern.

Leave a Reply

Your email address will not be published. Required fields are marked *

*